Residential Locksmith Services
]Updating your home’s security is always a good idea. If you’ve lost your keys, have been the victim of a break-in, or simply wish to bolster your home’s security, Elmer’s Lock and Safe can get the job done.Because we’re a mobile service, we’ve got everything you need right in our trucks. We’re fully stocked with parts, keys, locks, and repair equipment that will allow us to quickly and effectively solve your problems.
Additionally, we can also help you if you’re locked out of the house. Our locksmiths will quickly have you back indoors and can even re-key or replace the locks if you’re worried about security.
List of Residential Locksmith Services:
- Emergency house lockout services.
- Changing locks for residential homes.
- New lock installation on doors.
- Smart lock installation.
- Rekeying locks on doors.
- Damaged lock repair.
- Broken key extraction.
- Replace and/or repair window locks.
- Residential safe lockouts.
Do I need to know what type of locks my home has?
Elmer’s Lock & Safe Locksmith staffs trained professionals that can assess your locks and inform you of the services that you may need. You don’t need to have any prior knowledge on the lock products. A history of the services provided would be helpful but not needed.
How long does it take a locksmith to open a door in my home?
Once our locksmith has arrived they will assess your situation and inform you of the services you need. A traditional home lockout will take approximately 25 to 30 minutes depending on the lock and method being used.
Will my house’s lock be damaged?
Most door opening methods such as picking or the use of a bump key will leave the lock in working order. In the most extreme of cases, the lock might need to be drilled, after which the lock will need to be replaced. Replacement is also no issue and is a service that your home locksmith can provide for you.
When you are locked out of your home there is no reason to break a window or get stuck in a dog door. The best option is to contact an experienced locksmith and solve the problem with ease and efficiency. There is no reason to weaken the security of your home unnecessarily.
Elmer’s Lock & Safe Locksmith uses several different methods to make sure we take the path of least resistance and be certain your home is unharmed in the process. Most locks work of a pin and tumbler system, and can usually be picked by and experienced locksmith. The pin and tumbler lock is a common type of lock consisting of a bible (which houses springs and the driver pins), the plug (the part of the lock that will turn with the key), and the key pins (the pins that are touched by the key). The driver pins rest between the bible and the plug of the lock. The driver pins and springs will be a uniform height whereas the keys pins will all be unique in this regard. The key pins have heights that correspond with the grooves of the key, instead of with each other. By placing the key inside the plug, the key pins evenly elevate the driver pins and compress the springs. The driver pins now are set on the shear line, which is the line that separates the plug from the bible. Once the driver pins all reach the shear line the key can turn and the lock is opened.
The process of picking such a lock can be quite difficult, but relies on the basic knowledge that the driver pins must be artificially moved to the shear line. This is most often handled with a professional locksmith picking set, with the main tools being a tension wrench and one or two American standard size picks. The tension wrench is placed on the opposite end of where the key’s teeth (grooves that move the key pins) would go. Knowing what way the key turns is not necessary for our trained professionals because the tension wrench can be used to determine what rotation has more give, therefore determining the way to twist. Once the tension wrench is being twisted the correct way, the keyhole is raked a few times (a process of pulling the pick in and out). By raking the lock, some driver pins will be moved properly. Then, starting from the back pin, the locksmith will work their way through all of the pins (most locks having five pins). When the process is complete the tension wrench can turn the plug as if it was the key, and by acting as a key would in slow motion, no harm is done to the lock. Another method of opening a pin and tumbler lock is with the use of a bump key.
A bump key works on the similar task of moving the key pins so that the driver pins meet the shear line. Grooves are made in a key blank so that when turned as the key is struck (or bumped) it will temporarily allow the plug to be turned. Again, this method has the tool act as if it were a key and does not harm the lock.
If the lock is not simply pin and tumbler (such as a smart key) or is unresponsive to picking and bumping for some other reason, the lock will need to be drilled. The drill is set to the location of the pins and a hole is punctured in the device. The drill will break the pins that hold the lock in place and allow the locksmith open the door with the turn of a screwdriver. It is important not to drill your own locks because novice drilling may result in damage that renders the device unworkable. Examples of these problems are things like drilling past the pins and breaking the bolt of the lock so it does not retract; an accumulation of metal particulates may lock and jam the pins so that they cannot reach the shear line; etc. It is safer for your home to have these methods used by experienced locksmiths.